Selective and localized laser annealing effect for high-performance flexible multilayer MoS2 thin-film transistors

We report the use of ultra-short, pulsed-laser annealed Ti/Au contacts to enhance the performance of multilayer MoS2 field effect transistors （FETs） on flexible plastic substrates without thermal damage. An analysis of the temperature distribution, based on finite difference methods, enabled understanding of the compatibility of our picosecond laser annealing for flexible poly（ethylene naphthalate） （PEN） substrates with low thermal budget （〈 200 ℃）. The reduced contact resistance after laser annealing provided a significant improvement in transistor performance including higher peak field-effect mobility （from 24.84 to 44.84 cm2-V-l.s-1）, increased output resistance （0.42 MΩ at Vgs- Vth = 20 V, a three-fold increase）, a six-fold increase in the self-gain, and decreased sub- threshold swing. Transmission electron microscopy analysis and current-voltage measurements suggested that the reduced contact resistance resulted from the decrease of Schottky barrier width at the MoS2-metal junction. These results demonstrate that selective contact laser annealing is an attractive technology for fabricating low-resistivity metal-semiconductor junctions, providing important implications for the application of high-performance two-dimensional semicon- ductor FETs in flexible electronics.     

Surface properties of encapsulating hydrophobic nanoparticles regulate the main phase transition temperature of lipid bilayers: A simulation study

The main phase transition temperature of a lipid membrane, which is vital for its biomedical applications such as controllable drug release, can be regulated by encapsulating hydrophobic nanoparticles into the membrane. However, the exact relationship between surface properties of the encapsulating nanoparticles and the main phase transition temperature of a lipid membrane is far from clear. In the present work we performed coarse-grained molecular dynamics simulations to meet this end. The results show the surface roughness of nanoparticles and the density of surface-modifying molecules on the nanoparticles are responsible for the regulation. Increasing the surface roughness of the nanoparticles increases the main phase transition temperature of the lipid membrane, whereas it can be decreased in a nonlinear way via increasing the density of surface-modifying molecules on the nanoparticles. The results may provide insights for understanding recent experimental studies and promote the applications of nanoparticles in controllable drug release by regulating the main phase transition temperature of lipid vesicles.     

Formation of Transition Metal Cluster Adducts on the Surface of Single-walled Carbon Nanotubes: HRTEM Studies

We report the formation of chromium clusters on the outer walls of single-walled carbon nanotubes (SWNTs). The clusters were obtained by reacting purified SWNTs with chromium hexacarbonyl in dibutyl ether at 100°C. The functionalized SWNTs were characterized by thermogravimetic analysis, XPS, and high-resolution TEM. The curvature of the SWNTs and the high mobility of the chromium moieties on graphitic surfaces allow the growth of the metal clusters and we propose a mechanism for their formation.     

Comparative Study of Excited State Dipole Moment of Coumarin Laser Dyes： Solvent and Substituent Effect

In the present work, an array of novel substituted 2H-chromen-2-one （coumarin derivatives abbreviated as C-337, C-480, C-540A） has been subjected to photophysical analysis. Although the influence of the electron donating groups such as amino, substituted amino, hydroxyl, alkoxy groups at position 7 of the coumarin ring system has been extensively studied, However, coumarin moieties with substituent at position 3 have not been explored much. Attempt is made to explain the effect of electron donating and electron accepting substituent on excited state and ground state dipole moment. The ground state （μ） and excited state （μ＊） dipole moment of C-337, C-480, C-540A coumarins are estimated from solvatochromic shift of absorption and fluorescence spectra as a function of the dielectric constant and refractive index using Bakhshiev and Kwaski-Chamma Vialletequ. μ＊ and μ for all the reported coumarin are also calculated using Reichardt correlation method. The small angle is also reported between the ground and excited state dipole moment suggesting that they are almost parallel to each other. Excited state dipole moment is observed larger than ground state dipole moment for all the coumarins studied indicating substantial n-electron density redistribution.     

Injury prediction in a side impact crash using human body model simulation

Background

Improved understanding of the occupant loading conditions in real world crashes is critical for injury prevention and new vehicle design. The purpose of this study was to develop a robust methodology to reconstruct injuries sustained in real world crashes using vehicle and human body finite element models.

Methods

A real world near-side impact crash was selected from the Crash Injury Research and Engineering Network (CIREN) database. An average sedan was struck at approximately the B-pillar with a 290 degree principal direction of force by a lightweight pickup truck, resulting in a maximum crush of 45 cm and a crash reconstruction derived Delta-V of 28 kph. The belted 73-year-old midsized female driver sustained severe thoracic injuries, serious brain injuries, moderate abdominal injuries, and no pelvic injury. Vehicle finite element models were selected to reconstruct the crash. The bullet vehicle parameters were heuristically optimized to match the crush profile of the simulated struck vehicle and the case vehicle. The Total Human Model for Safety (THUMS) midsized male finite element model of the human body was used to represent the case occupant and reconstruct her injuries using the head injury criterion (HIC), half deflection, thoracic trauma index (TTI), and pelvic force to predict injury risk. A variation study was conducted to evaluate the robustness of the injury predictions by varying the bullet vehicle parameters.

Results

The THUMS thoracic injury metrics resulted in a calculated risk exceeding 90% for AIS3+ injuries and 70% risk of AIS4+ injuries, consistent with her thoracic injury outcome. The THUMS model predicted seven rib fractures compared to the case occupant's 11 rib fractures, which are both AIS3 injuries. The pelvic injury risk for AIS2+ and AIS3+ injuries were 37% and 2.6%, respectively, consistent with the absence of pelvic injury. The THUMS injury prediction metrics were most sensitive to bullet vehicle location. The maximum 95% confidence interval width for the mean injury metrics was only 5% demonstrating high confidence in the THUMS injury prediction.

Conclusions

This study demonstrates a variation study methodology in which human body models can be reliably used to robustly predict injury probability consistent with real world crash injury outcome.     

Reliability Meets Big Data: Opportunities and Challenges

ABSTRACT

Reliability field data such as that obtained from warranty claims and maintenance records have been used traditionally for such purposes as generating predictions for warranty costs and optimizing the cost of system operation and maintenance. In the current (and future) generation of many products, the nature of field reliability data is changing dramatically. In particular, products can be outfitted with sensors that can be used to capture information about how and when and under what environmental and operating conditions products are being used. Today some of that information is being used to monitor system health and interest is building to develop prognostic information systems. There are, however, many other potential applications for using such data. In this article we review some applications where field reliability data are used and explore some of the opportunities to use modern reliability data to provide stronger statistical methods to operate and predict the performance of systems in the field. We also provide some examples of recent technical developments designed to be used in such applications and outline remaining challenges.